Water Jetting Accessories - High Pressure Nozzles

High Pressure Jetting Systems

 

01) NOZZLES: ROUND JET

Standard type nozzles for lances with inbodyrated pistol. High quality round jet.
 


Material Pmax [bar] L [mm] Code Diameters XXX  [mm] - in stock
Stainless Steel 600 22 01.01.XXX 1.05; 1.30; 1.40; 1.50; 1.70; 1.80; 1.90; 2.10; 2.20; 2.30
Stainless Steel/tung. < 1000 28,5 01.02.XXX 0.78; 0.91; 1.09;1.27; 1.39; 1.57; 1.75; 1.95



02) NOZZLES: FLAT JET

Standard type nozzles for lances with inbodyrated pistol. High quality flat jet.



Material Pmax [bar] Angolo Code Diameters XXX [mm] - in stock
Stainless Steel 600 30° 02.01.XXX 1.05; 1.30; 1.40; 1.50; 1.70; 1.80; 1.90; 2.10; 2.20; 2.30
Stainless Steel/tung. < 1000 15° 02.02.XXX 0.78; 0.91; 1.09;1.27; 1.39; 1.57; 1.75; 1.95


03) THREADED INSERTS - ROUND JET

Inserti in industrial sapphire or martenistic stainless steel 1.4034 tempered to 56HRC to increase the hardness and resistance to wear.


Material Pmax [bar] G L [mm] d=XXX [mm] Code
sapphire/ stainless steel 1500 (*) M3 3 0.10 ÷ 1.00 03.01.XXX
stainless steel 1500 (*) M3 3 0.30 ÷ 1.30 03.11.XXX
sapphire/ stainless steel 1500 (*) M4 4 0.50 ÷ 1.70 03.02.XXX
stainless steel 1500 (*) M4 4 0.40 ÷ 1.80 03.12.XXX
stainless steel 1500 (*) M5 5 0.50 ÷ 2.60 03.13.XXX
sapphire/ stainless steel 1500 (*) M6 6 0.70 ÷ 3.00 03.03.XXX
sapphire/ stainless steel 1500 (*) M8X1.25 8 0.70 ÷ 4.00 03.04.XXX
sapphire/ stainless steel 2500 M8X1 12 0.15 ÷ 1.50 03.05.XXX
stainless steel 2500 M8X1 12 Tappo 03.05.000
stainless steel 2500 M10X1.5 19 0.20 ÷ 1.20 03.06.XXX (**)
stainless steel 2500 M10X1.5 19 Tappo 03.06.000
stainless steel 2500 M12X1.5 19 0.20 ÷ 1.20 03.07.XXX
stainless steel 2500 M12X1.5 19 Tappo 03.07.000


04) INSERT NOZZLES IN SAPPHIRE

Round jet nozzles for lance and pistol,in hardened steel with sapphire plate.


Material Pmax [bar] L [mm] Code Diameters XXX  [mm] 
Zaffiro/Stainless Steel 2500 24 04.01.XXX 0.10 ÷ 1.00
Zaffiro/Stainless Steel 2500 24 04.02.XXX ---


05) INSERT NOZZLES - ROUND JET

Insert nozzles for lance and pistol, in stainless steel 1.4034 hardened HRC 56 (DIN 50049/2 e 50049/3.1b). Available Also available with centering device (FIX) through the use of two paralel reference plains.


Material Pmax [bar] L [mm] Code Diameters XXX  [mm] 
Stainless Steel 1500 12 05.01.XXX 0.50 ÷ 0.90
Stainless Steel 1500 24 05.02.XXX 0.70 ÷ 4.00


06) INSERT NOZZLES - FLAT JET

Insert nozzles for lance and pistol, in stainless steel 1.4034 hardened HRC 56 (DIN 50049/2 e 50049/3.1b). Available Also available with centering device (FIX) through the use of two paralel reference plains.


Type Material Pmax [bar] L [mm] Angle  Code Diameters XXX  [mm] - in stock
Without FIX Stainless Steel 1500 20 15° 06.01.XXX 0.90; 1.00; 1.10; 1.20; 1.30; 1.50
With FIX Stainless Steel 1500 20 30° 06.02.XXX ---
45° 06.03.XXX
15° 06.04.XXX


PTC Nozzles Accessories Catalogue
Nozzles & Accessories Catalogue