Water Jetting Accessories - High Pressure Thermoplastic Tubing

High Pressure Jetting Systems



Multilayer thermoplastic piping with internal core and covering in special materials (PA, PUR, POM, PVDF, etc.) and spiral reinforcements in tensile steel. Thay are designed to satisfy whatever requirement in the waterjetting sector, hydraulics and special applications (umbelical tubes, low gas permeable and tubes for water cutting).

Maximum working pressure: 3.200 Bar.



41.01) FLEXIBLE TYPE 2

Application: Pipe washing, tube sheaves, condensators and with hydrodynamic equipment.

Type DI  [mm] Dmax [mm] DE [mm] Pmax [bar] L [m] G Code
3/2 3,2 9,5 6,9 1000 1 -- 41.01.001
-- 1/16" NPT 41.01.000
6 41.01.002
8 41.01.003
4/2 4 10,2 8 1200 1 -- 41.01.011
-- M7 - 1/8" 41.01.010
6 41.01.012
8 41.01.013
10 41.01.014
12 41.01.015
5/2 5 13 9,4 1040 1 -- 41.01.021
-- 1/8"BSPP 41.01.020
6 41.01.022
8 41.01.023
10 41.01.024
12 41.01.025
6/2 6,3 14 11,5 1000 1 -- 41.01.031
-- 1/4"BSPP 41.01.030
6 41.01.032
8 41.01.033
10 41.01.034
12 41.01.035
8/2 8,1 18 13,3 840 1 -- 41.01.041
-- 1/4"BSPP 41.01.040
6 41.01.042
8 41.01.043
10 41.01.044
12 41.01.045
10/2W 10 --- 17 1000 1 -- 41.01.051
-- M22x1,5 DKO 41.01.050
20 41.01.052
13/2W 12,8 --- 20,4 1000 20 M24x1,5 DKO 41.01.062
13/2WR 12,8 --- 22,2 1000 41.01.063


41.02) FLEXIBLE TYPE 4

Application: For use with hydrodynamic equipment.

Type DI [mm] DE  [mm] Pmax  [bar] Weight  [kg/m] G L  [m] Code
8/4 8 14,6 1500 0,390 -- 1 41.02.001
Raccordatura/ Fittings -- 41.02.000
9/16"x18UNF(LH) X M24x1,5 5 41.02.002
10/4 9,9 18,4 1500 0,690 -- 1 41.02.011
M24x1,5 -- 41.02.010
20 41.02.012
13/4 12,8 21,4 1280 0,800 -- 1 41.02.021
M24x1,5 -- 41.02.020
20 41.02.022
13/4H 12,8 22 1400 0,880 -- 1 41.02.031
M24x1,5 -- 41.02.030
20 41.02.032
20/4 19,8 29,6 1000 1,350 -- 1 41.02.041
M36x2 -- 41.02.040
20 41.02.042


41.03) FLEXIBLE TYPE 6 - UHP

Application: For use with ultra-high pressure hydrodynamic equipment.

Type DI  [mm] DE  [mm] Pmax  [bar] Weight  [kg/m] G L [m] Code
5/6 5 13,4 2500 0,450 --- 1 41.03.001
14x1,5LH 20 41.03.002
9/16”x18 UNF-LH 5 41.03.003
9/16”x18 UNF-LH 20 41.03.004
5/6H 5 13,8 2800 0,520 --- 1 41.03.011
9/16”x18 UNF-LH 20 41.03.012
14x1,5 LH 20 41.03.013
6/6H 6 16,4 2800 0,750 --- 1 41.03.014
9/16”x18 UNF-LH 20 41.03.015
8/6 8 16,4 2100 0,64 --- 1 41.03.021
9/16”x18 UNF-LH 20 41.03.022
14x1,5 LH 20 41.03.023
8/6H 8 17,8 2500 0,830 --- 1 41.03.031
9/16”x18 UNF-LH 20 41.03.032
14x1,5 LH 20 41.03.033
13/6 12,8 23,4 1800 1,160 --- 1 41.03.041
24x1,5DKO 20 41.03.042
20/6 19,8 32,5 1400 1,600 --- 1 41.03.051
36x2DKO 20 41.03.052
5 UHP 4,5 15,3 3200 0,693 --- 1 41.03. 061
9/16”X18 UNF-LH 20 41.03. 062
14x1,5-LH 20 41.03. 063
6 UHP 5,8 18,6 3200 1,060 --- 1 41.03. 071
9/16”X18 UNF-LH 20 41.03. 072
14x1,5-LH 20 41.03. 073
8 UHP 7,6 22,0 3200 1,500 --- 1 41.03. 081
9/16”X18 UNF-LH 20 41.03. 082
14x1,5 LH 20 41.03. 083


 41.20) SAFETY SLEEVES

Recommended as a restraint in the case of unthreading the portions of the tubing that are located at the pump and operation point (pistol, valve, pedal etc.). The safety sleeves are made in galvanised steel mesh with blocking eyes on the supports. The terminals are constructed without spot welds so as to avoid injury to the hands when being mounted.

Type DE tube  [mm] L1 [mm] L2 [mm] Ref. Code
KH-9/1S 7 ¸9 130 140 250.030 41.20.006
S-15/2 10 ¸15 600 140 246.010 41.20.001
S-20/2 15 ¸20 600 180 246.030 41.20.002
S-25/2 20 ¸25 600 200 246.050 41.20.009
S-30/2 25 ¸30 600 200 246.080 41.20.003
S-40/2 30 ¸40 600 220 246.140 41.20.004
S-50/2 40 ¸50 600 250 246.190 41.20.005
S-60/2 50 ¸60 600 280 246.250 41.20.007


 TYPE WR-1 : To safely block tubes already joined using two automatic choke nooses.

Type DE tube [mm] L1 [mm] L2 [mm] Ref. Code
WR-1 --- --- --- SAL “A” 41.20.008


PTC Nozzles Accessories Catalogue
Nozzles & Accessories Catalogue