Water Jetting Accessories - Special Nozzles & Equipment

High Pressure Jetting Systems


PTC offera a vast range of special equipment designed for special uses for both yards and everyday hydrodynamic maintenance operations.

23.01) ABRASIVE SYSTEMS / SAND BLASTERS

Complete system for the efficient and rapid removal of deposits, paints, cement etc. without creating dust. It's based on the resuction of the generated abrasive from the exit of the high velocity water jet from the main nozzle (ref.2). In the underwater version the sand blaster allows submerged surfaces to be cleaned underwater, for the removal of deposits from submerged bodies and the surface preparation of underwater oilines, off-shore craft, non-destructive testing (NDT), etc.

Medium Pressure Sand Blasters, complete with sand blaster (venturi body with sand suction insert, main nozzle (not included), regulatable nozzle holer, holding bead, exit mouthpiece), sand suction tube with clips (5m) and flowrate adjustable iron suction probe.

Code Nozzle G Pmax  [bar]
23.01.100 AP2 3/8”; 9/16”x18 700
23.01.101 01.02 1/4” 500

Ultra High Pressure Sand Blaster and Cutting Nozzle

Code Type G Pmax [bar] Qmax [bar]
23.01.201 Sabbiatore AP (completo) 9/16"x18UNF-LH 1380 40
23.01.250 Nozzle da Taglio 9/16"x18UNF-LH 2760 40


23.02) ROTATING ARM SPECIAL NOZZLE

One of the best solution for the cleaning of tanks, boilers, towers, and autoclaves. This group is equipped with a magnetic brake and additional extension tubes from 200mm to 800mm (other dimensions on request; up to 1500mm per arm), with arm rotation adjustable from 5 to 20 rpm.
They are also driveable using special telescopic devices for centering and movement, positionable on the operators movements above the tanks.

TWK Qmax [l/min] Pmax [bar] L [mm]mm] G Weight [kg] Code
125-1600 150 1600 360 M24x1.5 DKO
M 36x2 DKO
3/4” NPT 1NPT
10.5 23.02.011
150-1400 250 1400 405 15 23.02.012
185-1200 400 1200 445 23.5 23.02.013


SURFACE CLEANER

                

23.03) SURFACE CLEANER (SC) / WALL CLEANER (WC) 

Special equipment for the cleaning, paint removal and preparation of industrail flooring and road surfaces (cement and bitumin agregates, road signs, runway rubber in airports, painting tunnels, etc) in positioned horizontally Surface Cleaner (SC) and positioned vertically Wall Cleaner (WC).
Built from a robustly constructed welded steel box, rotating joint, long lasting waterproofed ball bearings, 2 fixed wheels and 1 swivelling wheel, 4 rotating arms with inserts for 2 to 8 nozzles.

Characteristics:

Type Pwork [bar] Qmax [l/min] Lwork [mm] Nozzles G Weight [kg] Code
SC 300 900 80 300 8 M30x1,5 F 75 23.03.001
SC 500 900 80 500 8 M30x1,5 F 90 23.03.002
SC 500 1000 80 500 4 M24x1,5 DKO 90 23.03.012
SC3000 Air 3000 40 500x2 12 M14x1,5 LH 55 23.03.021 (*)
SCA SHC3000 3000 40 250 8 M14x1,5 LH 90 23.03.022 (*)
WC3000 Air 3000 30 200 12 M14x1,5 LH 35 23.03.023 (*)
FCSG (**) 1000 110 610 4 - 116 23.03.025
1500 110 23.03.026


23.04 STONEAGE SPECIAL NOZZLES FOR SMALL PIPES 

Special nozzles with autorotating heads which give excellent performance for the cleaning of small and medium diameter pipes. The Gopher presents a viscous fluid speed regulator.

BANSHEE (code. 23.04.3XX)

Type Di Tubi Pmax [bar] Qmax [l/min] D [mm] Ltot [mm] G Code
BN 9.5 12.7 ¸ 16 1000 / 1500 17 ¸ 25 9.5 65.3 M7 23.04.351
BN 13 16 ¸ 25 1000 / 1500 30 ¸ 38 12,7 73,7 1/8” BSP 23.04.352
BN 18 22 ¸ 38 1000 / 1500 30 ¸ 53 17,6 96,5 1/4” BSP 23.04.353
BN 18-40k 22 ¸ 38 2800 15 ¸ 26 17,6 119 1/4” BSP 23.04.354
BN 24 29 ¸ 51 1000 / 1500 40 ¸ 90 24 130 1/2’’BSP 23.04. 355
BN 33 38 ¸ 50 1000 / 1500 41 ¸ 181 33 175 1/2’’BSP 23.04. 356

GOPHER (code. 23.04.2XX)

Tipo  Nozzles P [bar] Q [l/min] D [mm] Ltot [mm] G Code
GO-M9 5 x AP2 1500 30 ÷ 90 41 198 9/16 MP 23.04.251
GO-H9C 6 x OS4 2800 20 ÷ 45 41 198 9/16 HP 23.04.252


23.04) STONEAGE SPECIAL NOZZLES STONEAGE FOR LARGE DIAMETER PIPEWORK

Special nozzles with autorotating heads and viscous fluid speed regulator. Ideal for optimum cleaning of pipes and columns of medium and large diameter.

RAPTOR (code.23.04.6xx)

Type Tubi Pmax [bar] Qmax [l/min] D [mm] Ltot [mm] Nozzles G Code
15k 3” ÷ 12” 1000 230 2” 240
÷
AP2
1/2” NPT 23.04.601
22k 1500 9/16 MP 23.04.602


 BJV (code.23.04.7xx)

Type Pipes Pmax [bar] Qmax [l/min] D [mm] Ltot [mm] Nozzles G Code
BJV-M 6” ÷ 72” 1000 380 76 ÷ 89 184 6 x AP4 3/4” NPT 23.04.701
BJV-22k 1500 230 213 AP4 3/4MP 23.04.703
BJV-H9 2800 70 OS6 9/16 HP 23.04.704


23.05) TORUS NOZZLES

Special nozzle with rotation according to a 3-D model with magnetically controled autorotating head. The nozzle covers completely all directions in 360° and is therefore the best solution for cleaning tanks, cisterns, reactors, colums, etc. The simple construction of the manifold and adaptor allows use in a wide range of pressures and flowrates by varying just the dimensions of the nozzles.

  Tubi Pmax [bar] Qmax [l/min] D [mm] Ltot [mm] Nozzles G Code
TORUS 3” ¸ 12” 1500 303 143 240 AP4 3/4”, 1” NPT 23.05.051


24) STONEAGE NOZZLES

Quality nozzles that complete the supply of special nozzles Stoneage as describe in the previous section. A choice of diameters (d=XXX). 

Type Material Pmax [bar] G d =XXX [mm] Code
AP2 Inox 1400 1/8 npt 0,46 ÷ 2,69 24.01.XXX
AP4 1400 1/4 npt 0,46 ÷ 4,19 24.02.XXX
APF4 1400 1/4 npt 0,61 ÷ 3,68 24.03.XXX
OS4 sapphire/stainless steel 2759 1/4 -28 NF 0,25 ÷ 0,89 24.04.XXX
OS6 2759 3/8 -24 NF 0,23 ÷  0,86 24.05.XXX
OS7 2759 7/16 -20 NF 0,28 ÷  0,89 24.06.XXX


PTC Nozzles Accessories Catalogue
Nozzles & Accessories Catalogue