Water Jetting Accessories - Turbo Nozzles

High Pressure Jetting Systems



Nozzles designed for use with pistols with rigid lances. They allow the useful working area to be expanded increasing the performance and improving workmanship. The use of TURBO series nozzles is reccomended for the processing of large surfaces such as hulls and marine structures, concrete constructions, tanks, etc.

22.01) Turbo "MONRO JET"

Orbital jet nozzle made from a caved steel body inside which a longish rotor is free to rotate, inclined with respect to the axis, and moves in its seat due to the pressure. Simplicity of construction and ease of use and maintenance make this nozzle ideal for the processing of large surfaces.

Type Pmax [bar] Angle Qmax [l/min] LxD [mm] Peso [kg] G (fem) Code
F0.5 500 20° 15 110x49 0.60 1/4” 22.01.008
F0 400 30 116x52,2 0,60 1/4” 22.01.009
F1 1500 98 134,9x49 1,25 9/16"x18LH 22.01.010
F1 1500 98 134,9x49 1,25 14x1,5 UNF-LH 22.01.011
F2 1000 98 134,9x49 1,25 3/8” 22.01.012
F3 800 67 132,2x43,2 0,67 3/8" 22.01.030
F4 500 22° 55 109x43 0,64 3/8" 22.01.041
F6 500 30° 55 109x43 0,64 3/8" 22.01.061
F25 2500 20° - 134,9x49 - 9/16"x18LH 22.01.050


 22.02) TURBO PRD BRAKED

On the rotating head are mounted different types of insert nozzles with round jets in accordance with the desired maximum working pressure: from 2 nozzles (code. 05.02) for type PRD 1500, up to 4 nozzles M10x1,5 (code. 03.06) with special insert and flow cross guide for type PRD 3000.

Type Pmax [bar] Qmax [l/min] Vmax [rpm] G Weight [kg] Code
PRD 1500 1500 40 2500 M14x1,5 1,0 22.02.011
PRD 3000 3000 30 2500 M14x1.5 1,0 22.02.021


22.03) BARRACUDA STONEAGE

Rotating head nozzles for lances with speed regulator (1000÷2000rpm) with viscous connection complete with choice of input attachment. Two or four jets can be installed on the nozzle as described below and should be chose according to the maximum working performance required.

Type Pmax [bar] Qmax [l/min] Nozzles Ø min/max [mm] G Code
BC – K 1000 57 2 x AP4 0.61÷1.19 9/16” MP 22.03.020
1500 22.03.021
BC – K – P2 1000 57 4 x AP2 0.45÷0.81 9/16” MP 22.03.024
1500 22.03.022
BC – H9 – C 2800 30 4 x OS7 0.45÷0.58 9/16” HP 22.03.023
BC – H9LF – C 15 0.35÷0.41 (*)


22.04) PRD 3000 Air

The rotating head of this particular model is driven by a pneumatic motor. Ease of use and maintenance make this nozzle ideal for the processing of large surfaces.

Type Pmax [bar] Qmax [l/min] Vmax [rpm] G L [mm] Weight [kg] Code
PRD 3000 Air 3000 30 3000 M14x1,5 232 1,5 22.04.001


22.05) NOZZLE HOLDER HEADS FOR ROTATING TOOLS

These rotating heads complement the pneumatic tools (PRD 2500 Air e Rotolance). On the heads are mounted threaded insert round jet nozzles in sapphire/stainless steel M8 (code. 03.05) and in stainless steel M10 (code. 03.06) based on the max working pressure.

Type Code Nozzles Applicazioni
RLH 1 22.05.001 Max: 6 x code.03.05 Std: 6 x 0,35 mm Cleaning and removal in difficult to reach areas
RLH 3 22.05.003 Max: 4 x code.03.05 Std.: 4 x 0,4 mm Removal of hard to remove surface coverings.
Cleaning of areas with limited access.
RLH 5 22.05.005 Max: 2 x code.03.05 Std.: 2 x 0,6 mm
RLH 2 22.05.002 Max: 4 x code.03.06 Std.: 4 x 0,4 mm Surface treatments, removal of surface rust
and ruggedness, paint and covering removal
RLH 4 22.05.004 Max: 6 x code.03.06 Std.: 6 x 0,35 mm
RLH 6 22.05.006 Max: 8 x code.03.06 Std.: 8 x 0,3 mm


PTC Nozzles Accessories Catalogue
Nozzles & Accessories Catalogue